//-------------------------------------------------------
//  syn2tlf Translator Version 3.1-s002
//  Copyright Cadence Design Systems, Inc. 1985, 1995
//  All Rights Reserved             Licenced Software
//-------------------------------------------------------
//  syn2tlf Options    : -S -T -E -O -L -N -COST
//  syn2tlf Time Stamp : Tue Feb 20 19:54:49 2001
//  Input File         : fs90a_b.lib
//-------------------------------------------------------

Header(
    Library("fs90a_b")
    Date("20 Feb. 2001")
    Version("200103.3.0")
    Vendor("Faraday_Technology_Corp")
    TLF_Version("3.1")
    Generated_By("syn2tlf version_3.1-s002")
    Environment("commercial")
)

Model(G5KCapModel
    (Spline
        (Load_Axis 2 3 4 5 6 11 17 57 201 10201)
        data(
            (0.003749 0.011264 0.022422 0.042293 0.055158 0.091714 0.103699 0.238251 0.722691 1.602691)
        )
    )
)

Model(G5KResModel
    (Spline
        (Load_Axis 2 3 4 5 6 11 17 57 201 10201)
        data(
            (0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000)
        )
    )
)

Model(G10KCapModel
    (Spline
        (Load_Axis 2 3 4 5 6 11 17 57 201 10201)
        data(
            (0.004224 0.012408 0.024570 0.045654 0.060298 0.100038 0.114453 0.272202 0.840118 1.720118)
        )
    )
)

Model(G10KResModel
    (Spline
        (Load_Axis 2 3 4 5 6 11 17 57 201 10201)
        data(
            (0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000)
        )
    )
)

Model(G30KCapModel
    (Spline
        (Load_Axis 2 3 4 5 6 11 17 57 201 10201)
        data(
            (0.005139 0.014555 0.028494 0.051075 0.069414 0.114629 0.134446 0.342830 1.092995 1.972995)
        )
    )
)

Model(G30KResModel
    (Spline
        (Load_Axis 2 3 4 5 6 11 17 57 201 10201)
        data(
            (0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000)
        )
    )
)

Model(G50KCapModel
    (Spline
        (Load_Axis 2 3 4 5 6 11 17 57 201 10201)
        data(
            (0.005896 0.016333 0.031750 0.055722 0.077053 0.126914 0.151061 0.399925 1.295906 2.175906)
        )
    )
)

Model(G50KResModel
    (Spline
        (Load_Axis 2 3 4 5 6 11 17 57 201 10201)
        data(
            (0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000)
        )
    )
)

Model(G100KCapModel
    (Spline
        (Load_Axis 2 3 4 5 6 11 17 57 201 10201)
        data(
            (0.007146 0.019184 0.036907 0.062621 0.089003 0.145992 0.177725 0.496936 1.646058 2.526058)
        )
    )
)

Model(G100KResModel
    (Spline
        (Load_Axis 2 3 4 5 6 11 17 57 201 10201)
        data(
            (0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000)
        )
    )
)

Model(G200KCapModel
    (Spline
        (Load_Axis 2 3 4 5 6 11 17 57 201 10201)
        data(
            (0.008906 0.023162 0.044000 0.071826 0.105389 0.172022 0.214738 0.634902 2.147464 3.027464)
        )
    )
)

Model(G200KResModel
    (Spline
        (Load_Axis 2 3 4 5 6 11 17 57 201 10201)
        data(
            (0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000)
        )
    )
)

Model(G500KCapModel
    (Spline
        (Load_Axis 2 3 4 5 6 11 17 57 201 10201)
        data(
            (0.011827 0.029427 0.055018 0.084920 0.130522 0.211640 0.273504 0.867574 3.006256 3.886256)
        )
    )
)

Model(G500KResModel
    (Spline
        (Load_Axis 2 3 4 5 6 11 17 57 201 10201)
        data(
            (0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000)
        )
    )
)

Model(G1000KCapModel
    (Spline
        (Load_Axis 2 3 4 5 6 11 17 57 201 10201)
        data(
            (0.015101 0.036485 0.067461 0.099669 0.158875 0.256291 0.339733 1.129797 3.974080 4.854080)
        )
    )
)

Model(G1000KResModel
    (Spline
        (Load_Axis 2 3 4 5 6 11 17 57 201 10201)
        data(
            (0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000)
        )
    )
)

Model(rise_xzMod
    (Spline
        (Input_Slew_Axis 0.094500 0.178300 0.331200 0.625500 1.187100 2.173400)
        (Load_Axis 0.000000 0.008100 0.016100 0.032100 0.064100 0.128100)
        data()
    )
)

Model(fall_xzMod
    (Spline
        (Input_Slew_Axis 0.074700 0.170600 0.302400 0.547300 1.022800 1.866800)
        (Load_Axis 0.000000 0.008100 0.016100 0.032100 0.064100 0.128100)
        data()
    )
)

Model(rise_xsMod
    (Spline
        (Input_Slew_Axis 0.094500 0.178300 0.331200 0.625500 1.187100 2.173400)
        (Load_Axis 0.000000 0.008200 0.016200 0.032200 0.064200 0.256200)
        data()
    )
)

Model(fall_xsMod
    (Spline
        (Input_Slew_Axis 0.074700 0.170600 0.302400 0.547300 1.022800 1.866800)
        (Load_Axis 0.000000 0.008200 0.016200 0.032200 0.064200 0.256200)
        data()
    )
)

Model(rise_xlMod
    (Spline
        (Input_Slew_Axis 0.094500 0.178300 0.331200 0.625500 1.187100 2.173400)
        (Load_Axis 0.008300 0.016300 0.032300 0.064300 0.128300 0.512300)
        data()
    )
)

Model(fall_xlMod
    (Spline
        (Input_Slew_Axis 0.074700 0.170600 0.302400 0.547300 1.022800 1.866800)
        (Load_Axis 0.008300 0.016300 0.032300 0.064300 0.128300 0.512300)
        data()
    )
)

Model(rise_x1Mod
    (Spline
        (Input_Slew_Axis 0.094500 0.178300 0.331200 0.625500 1.187100 2.173400)
        (Load_Axis 0.008400 0.016400 0.032400 0.064400 0.128400 0.512400)
        data()
    )
)

Model(fall_x1Mod
    (Spline
        (Input_Slew_Axis 0.074700 0.170600 0.302400 0.547300 1.022800 1.866800)
        (Load_Axis 0.008400 0.016400 0.032400 0.064400 0.128400 0.512400)
        data()
    )
)

Model(rise_x2Mod
    (Spline
        (Input_Slew_Axis 0.094500 0.178300 0.331200 0.625500 1.187100 2.173400)
        (Load_Axis 0.016500 0.032500 0.064500 0.128500 0.256500 1.024500)
        data()
    )
)

Model(fall_x2Mod
    (Spline
        (Input_Slew_Axis 0.074700 0.170600 0.302400 0.547300 1.022800 1.866800)
        (Load_Axis 0.016500 0.032500 0.064500 0.128500 0.256500 1.024500)
        data()
    )
)

Model(rise_x3Mod
    (Spline
        (Input_Slew_Axis 0.094500 0.178300 0.331200 0.625500 1.187100 2.173400)
        (Load_Axis 0.016600 0.032600 0.064600 0.128600 0.256600 1.024600)
        data()
    )
)

Model(fall_x3Mod
    (Spline
        (Input_Slew_Axis 0.074700 0.170600 0.302400 0.547300 1.022800 1.866800)
        (Load_Axis 0.016600 0.032600 0.064600 0.128600 0.256600 1.024600)
        data()
    )
)

Model(rise_x4Mod
    (Spline
        (Input_Slew_Axis 0.094500 0.178300 0.331200 0.625500 1.187100 2.173400)
        (Load_Axis 0.032700 0.064700 0.128700 0.256700 0.512700 1.024700)
        data()
    )
)

Model(fall_x4Mod
    (Spline
        (Input_Slew_Axis 0.074700 0.170600 0.302400 0.547300 1.022800 1.866800)
        (Load_Axis 0.032700 0.064700 0.128700 0.256700 0.512700 1.024700)
        data()
    )
)

Model(rise_x6Mod
    (Spline
        (Input_Slew_Axis 0.094500 0.178300 0.331200 0.625500 1.187100 2.173400)
        (Load_Axis 0.064800 0.128800 0.256800 0.512800 1.024800 2.048700)
        data()
    )
)

Model(fall_x6Mod
    (Spline
        (Input_Slew_Axis 0.074700 0.170600 0.302400 0.547300 1.022800 1.866800)
        (Load_Axis 0.064800 0.128800 0.256800 0.512800 1.024800 2.048700)
        data()
    )
)

Model(rise_x8Mod
    (Spline
        (Input_Slew_Axis 0.094500 0.178300 0.331200 0.625500 1.187100 2.173400)
        (Load_Axis 0.064900 0.128900 0.256900 0.512900 1.024900 2.048900)
        data()
    )
)

Model(fall_x8Mod
    (Spline
        (Input_Slew_Axis 0.074700 0.170600 0.302400 0.547300 1.022800 1.866800)
        (Load_Axis 0.064900 0.128900 0.256900 0.512900 1.024900 2.048900)
        data()
    )
)

Model(rise_x12Mod
    (Spline
        (Input_Slew_Axis 0.094500 0.178300 0.331200 0.625500 1.187100 2.173400)
        (Load_Axis 0.128000 0.256000 0.512000 1.024000 2.048000 4.096000)
        data()
    )
)

Model(fall_x12Mod
    (Spline
        (Input_Slew_Axis 0.074700 0.170600 0.302400 0.547300 1.022800 1.866800)
        (Load_Axis 0.128000 0.256000 0.512000 1.024000 2.048000 4.096000)
        data()
    )
)

Model(rise_OPMod
    (Spline
        (Input_Slew_Axis 0.094500 0.178300 0.331200 0.625500 1.187100 2.173400)
        (Load_Axis 5.000000 10.000000 20.000000 40.000000 70.000000 100.000000)
        data()
    )
)

Model(fall_OPMod
    (Spline
        (Input_Slew_Axis 0.074700 0.170600 0.302400 0.547300 1.022800 1.866800)
        (Load_Axis 5.000000 10.000000 20.000000 40.000000 70.000000 100.000000)
        data()
    )
)

Model(rise_PECLMod
    (Spline
        (Input_Slew_Axis 0.094500 0.178300 0.331200 0.625500 1.187100 2.173400)
        (Load_Axis 5.000000 10.000000 15.000000 20.000000 30.000000 40.000000)
        data()
    )
)

Model(fall_PECLMod
    (Spline
        (Input_Slew_Axis 0.074700 0.170600 0.302400 0.547300 1.022800 1.866800)
        (Load_Axis 5.000000 10.000000 15.000000 20.000000 30.000000 40.000000)
        data()
    )
)

Model(rise_OSCMod
    (Spline
        (Input_Slew_Axis 0.094500 0.178300 0.331200 0.625500 1.187100 2.173400)
        (Load_Axis 5.000000 10.000000 15.000000 20.000000 25.000000 30.000000)
        data()
    )
)

Model(fall_OSCMod
    (Spline
        (Input_Slew_Axis 0.074700 0.170600 0.302400 0.547300 1.022800 1.866800)
        (Load_Axis 5.000000 10.000000 15.000000 20.000000 25.000000 30.000000)
        data()
    )
)

Model(rise_USBLOWMod
    (Spline
        (Input_Slew_Axis 0.094500 0.178300 0.331200 0.625500 1.187100 2.173400)
        (Load_Axis 10.000000 90.000000 210.000000 350.000000 450.000000 500.000000)
        data()
    )
)

Model(fall_USBLOWMod
    (Spline
        (Input_Slew_Axis 0.074700 0.170600 0.302400 0.547300 1.022800 1.866800)
        (Load_Axis 10.000000 90.000000 210.000000 350.000000 450.000000 500.000000)
        data()
    )
)

Model(rise_EXTMod
    (Spline
        (Input_Slew_Axis 0.094500 0.178300 0.331200 0.625500 1.187100 2.173400)
        (Load_Axis 0.100000 0.200000 0.300000 0.400000 0.500000 0.600000)
        data()
    )
)

Model(fall_EXTMod
    (Spline
        (Input_Slew_Axis 0.074700 0.170600 0.302400 0.547300 1.022800 1.866800)
        (Load_Axis 0.100000 0.200000 0.300000 0.400000 0.500000 0.600000)
        data()
    )
)

Model(rise_INTMod
    (Spline
        (Input_Slew_Axis 0.094500 0.178300 0.331200 0.625500 1.187100 2.173400)
        (Load_Axis 0.010000 0.020000 0.030000 0.040000 0.050000 0.060000)
        data()
    )
)

Model(fall_INTMod
    (Spline
        (Input_Slew_Axis 0.074700 0.170600 0.302400 0.547300 1.022800 1.866800)
        (Load_Axis 0.010000 0.020000 0.030000 0.040000 0.050000 0.060000)
        data()
    )
)

Model(MEMMod
    (Spline
        (Input_Slew_Axis 0.100000 1.000000 2.000000)
        (Load_Axis 0.040000 0.320000 1.300000)
        data()
    )
)

Model(k_process_wire_resMod
    (Linear
        value(-~:~:0.000000:1.000000)
    )
)

Model(k_process_setup_riseMod
    (Linear
        value(-~:~:0.000000:1.000000)
    )
)

Model(k_process_setup_fallMod
    (Linear
        value(-~:~:0.000000:1.000000)
    )
)

Model(k_process_hold_riseMod
    (Linear
        value(-~:~:0.000000:1.000000)
    )
)

Model(k_process_hold_fallMod
    (Linear
        value(-~:~:0.000000:1.000000)
    )
)

Model(k_process_recovery_riseMod
    (Linear
        value(-~:~:0.000000:1.000000)
    )
)

Model(k_process_recovery_fallMod
    (Linear
        value(-~:~:0.000000:1.000000)
    )
)

Model(k_process_min_pulse_width_lowMod
    (Linear
        value(-~:~:0.000000:1.000000)
    )
)

Model(k_process_min_pulse_width_highMod
    (Linear
        value(-~:~:0.000000:1.000000)
    )
)

Model(k_volt_setup_riseMod
    (Linear
        value(-~:~:2.000000:-0.400000)
    )
)

Model(k_volt_setup_fallMod
    (Linear
        value(-~:~:2.000000:-0.400000)
    )
)

Model(k_volt_hold_riseMod
    (Linear
        value(-~:~:2.000000:-0.400000)
    )
)

Model(k_volt_hold_fallMod
    (Linear
        value(-~:~:2.000000:-0.400000)
    )
)

Model(k_volt_recovery_riseMod
    (Linear
        value(-~:~:2.000000:-0.400000)
    )
)

Model(k_volt_recovery_fallMod
    (Linear
        value(-~:~:2.000000:-0.400000)
    )
)

Model(k_volt_min_pulse_width_lowMod
    (Linear
        value(-~:~:2.000000:-0.400000)
    )
)

Model(k_volt_min_pulse_width_highMod
    (Linear
        value(-~:~:2.000000:-0.400000)
    )
)

Model(k_temp_setup_riseMod
    (Linear
        value(-~:~:0.947500:0.002100)
    )
)

Model(k_temp_setup_fallMod
    (Linear
        value(-~:~:0.947500:0.002100)
    )
)

Model(k_temp_hold_riseMod
    (Linear
        value(-~:~:0.947500:0.002100)
    )
)

Model(k_temp_hold_fallMod
    (Linear
        value(-~:~:0.947500:0.002100)
    )
)

Model(k_temp_recovery_riseMod
    (Linear
        value(-~:~:0.947500:0.002100)
    )
)

Model(k_temp_recovery_fallMod
    (Linear
        value(-~:~:0.947500:0.002100)
    )
)

Model(k_temp_min_pulse_width_lowMod
    (Linear
        value(-~:~:0.947500:0.002100)
    )
)

Model(k_temp_min_pulse_width_highMod
    (Linear
        value(-~:~:0.947500:0.002100)
    )
)

Model(k_process_cell_fallMod
    (Linear
        value(-~:~:0.000000:1.000000)
    )
)

Model(k_process_cell_riseMod
    (Linear
        value(-~:~:0.000000:1.000000)
    )
)

Model(k_volt_cell_fallMod
    (Linear
        value(-~:~:2.000000:-0.400000)
    )
)

Model(k_volt_cell_riseMod
    (Linear
        value(-~:~:2.000000:-0.400000)
    )
)

Model(k_temp_cell_fallMod
    (Linear
        value(-~:~:0.947500:0.002100)
    )
)

Model(k_temp_cell_riseMod
    (Linear
        value(-~:~:0.947500:0.002100)
    )
)

Timing_Props(
    For_Pin(Output    Slew_Limit(1.400000))
    For_Pin(Input    Pin_Cap(0.020000))
    For_Pin(Output    Pin_Cap(0.000000))
    For_Pin(Bidir    Pin_Cap(0.020000))
    Proc_Var(1.000000)
    Voltage(2.500000)
    Temperature(25.000000)
    Proc_Mult(1.000000)
    Volt_Mult(1.000000)
    Temp_Mult(1.000000)
    WireLoad_By_Area(
        ("G5K" 13500.000000 Net_Cap(G5KCapModel) Net_Res(G5KResModel))
        ("G10K" 27000.000000 Net_Cap(G10KCapModel) Net_Res(G10KResModel))
        ("G30K" 81000.000000 Net_Cap(G30KCapModel) Net_Res(G30KResModel))
        ("G50K" 135000.000000 Net_Cap(G50KCapModel) Net_Res(G50KResModel))
        ("G100K" 270000.000000 Net_Cap(G100KCapModel) Net_Res(G100KResModel))
        ("G200K" 540000.000000 Net_Cap(G200KCapModel) Net_Res(G200KResModel))
        ("G500K" 1350000.000000 Net_Cap(G500KCapModel) Net_Res(G500KResModel))
        ("G1000K" 2700000.000000 Net_Cap(G1000KCapModel) Net_Res(G1000KResModel))
    )
    Proc_Mult_Net_Res(k_process_wire_resMod)
    Proc_Mult_MPWL(k_process_min_pulse_width_lowMod)
    Volt_Mult_MPWL(k_volt_min_pulse_width_lowMod)
    Temp_Mult_MPWL(k_temp_min_pulse_width_lowMod)
    Proc_Mult_MPWH(k_process_min_pulse_width_highMod)
    Volt_Mult_MPWH(k_volt_min_pulse_width_highMod)
    Temp_Mult_MPWH(k_temp_min_pulse_width_highMod)
    Proc_Mult_Setup(Rise(k_process_setup_riseMod) Fall(k_process_setup_fallMod))
    Volt_Mult_Setup(Rise(k_volt_setup_riseMod) Fall(k_volt_setup_fallMod))
    Temp_Mult_Setup(Rise(k_temp_setup_riseMod) Fall(k_temp_setup_fallMod))
    Proc_Mult_Hold(Rise(k_process_hold_riseMod) Fall(k_process_hold_fallMod))
    Volt_Mult_Hold(Rise(k_volt_hold_riseMod) Fall(k_volt_hold_fallMod))
    Temp_Mult_Hold(Rise(k_temp_hold_riseMod) Fall(k_temp_hold_fallMod))
    Proc_Mult_Recovery(Rise(k_process_recovery_riseMod) Fall(k_process_recovery_fallMod))
    Volt_Mult_Recovery(Rise(k_volt_recovery_riseMod) Fall(k_volt_recovery_fallMod))
    Temp_Mult_Recovery(Rise(k_temp_recovery_riseMod) Fall(k_temp_recovery_fallMod))
    Proc_Mult_Propagation(Rise(k_process_cell_riseMod) Fall(k_process_cell_fallMod))
    Volt_Mult_Propagation(Rise(k_volt_cell_riseMod) Fall(k_volt_cell_fallMod))
    Temp_Mult_Propagation(Rise(k_temp_cell_riseMod) Fall(k_temp_cell_fallMod))
    Table_Input_Threshold(0.500000)
    Table_Output_Threshold(0.500000)
    Table_Transition_Start(0.100000)
    Table_Transition_End(0.900000)
)


Cell(BUF1CK
    Celltype(Comb)

    Model(ioDelayRiseModel0 rise_x1Mod
        (Spline
            data(
                (0.112600 0.127000 0.154600 0.209200 0.317100 0.963900)
                (0.125000 0.139500 0.167100 0.221400 0.329300 0.976000)
                (0.150900 0.165500 0.192900 0.246700 0.354400 1.000900)
                (0.189300 0.204200 0.231900 0.285400 0.392200 1.038000)
                (0.241200 0.256800 0.285500 0.339500 0.446300 1.090600)
                (0.309200 0.325900 0.356300 0.412000 0.520300 1.165700)
            )
        )
    )

    Model(ioDelayFallModel0 fall_x1Mod
        (Spline
            data(
                (0.098800 0.112400 0.136300 0.179600 0.260900 0.741800)
                (0.108800 0.122500 0.146600 0.189900 0.271200 0.752100)
                (0.124500 0.138600 0.163400 0.207000 0.288500 0.769100)
                (0.145100 0.159600 0.185100 0.229700 0.311500 0.792100)
                (0.169400 0.185600 0.213100 0.259600 0.342900 0.823200)
                (0.191800 0.210100 0.240900 0.291800 0.379600 0.863500)
            )
        )
    )

    Model(SlopeRiseModel0 rise_x1Mod
        (Spline
            data(
                (0.090300 0.120600 0.189300 0.329400 0.612800 2.328100)
                (0.091700 0.121100 0.190300 0.329800 0.613000 2.328100)
                (0.095500 0.124000 0.192800 0.330000 0.614000 2.328100)
                (0.102300 0.134000 0.196600 0.334600 0.615200 2.328400)
                (0.111700 0.144200 0.210700 0.344100 0.621300 2.329100)
                (0.136100 0.166900 0.229700 0.361200 0.635600 2.334700)
            )
        )
    )

    Model(SlopeFallModel0 fall_x1Mod
        (Spline
            data(
                (0.056100 0.074200 0.105000 0.167600 0.293500 1.072000)
                (0.060200 0.075300 0.108200 0.167600 0.295000 1.072000)
                (0.065600 0.081300 0.110800 0.173800 0.297000 1.072200)
                (0.074900 0.091500 0.121100 0.181300 0.301000 1.072900)
                (0.093500 0.110200 0.138900 0.196800 0.311400 1.076200)
                (0.124700 0.139500 0.167800 0.226000 0.339800 1.086900)
            )
        )
    )

    Timing_Props(
        Area(4.000000)
    )

    Pin(O Pintype(Data) Pindir(Output) Function(I) Timing_Props(Load_Limit(0.302400)))
    Pin(I Pintype(Data) Pindir(Input) Timing_Props(Pin_Cap(0.003600)))

    Path(I => O  01 01 Delay(ioDelayRiseModel0) Slew(SlopeRiseModel0))
    Path(I => O  10 10 Delay(ioDelayFallModel0) Slew(SlopeFallModel0))

)

Cell(BUF2CK
    Celltype(Comb)

    Model(ioDelayRiseModel0 rise_x2Mod
        (Spline
            data(
                (0.113600 0.128400 0.156400 0.211000 0.319000 0.967200)
                (0.126300 0.141200 0.169100 0.223500 0.331500 0.979600)
                (0.153000 0.168000 0.195900 0.249800 0.357600 1.005100)
                (0.192200 0.207800 0.235900 0.289500 0.396300 1.043300)
                (0.245000 0.261000 0.290100 0.344300 0.451000 1.096100)
                (0.313300 0.330500 0.361300 0.417200 0.525200 1.171100)
            )
        )
    )

    Model(ioDelayFallModel0 fall_x2Mod
        (Spline
            data(
                (0.102000 0.116300 0.141100 0.185200 0.266500 0.744900)
                (0.112300 0.126700 0.151700 0.195700 0.277100 0.755400)
                (0.129100 0.143700 0.169400 0.213900 0.295400 0.773400)
                (0.151400 0.166600 0.193100 0.238200 0.320200 0.798200)
                (0.178800 0.195900 0.224200 0.271700 0.354800 0.832200)
                (0.206300 0.226100 0.257400 0.309300 0.396900 0.877200)
            )
        )
    )

    Model(SlopeRiseModel0 rise_x2Mod
        (Spline
            data(
                (0.083300 0.111700 0.182400 0.320500 0.605600 2.323700)
                (0.084500 0.113800 0.183200 0.320700 0.605800 2.323700)
                (0.089400 0.118300 0.186000 0.323900 0.606400 2.323900)
                (0.096800 0.127600 0.190600 0.326500 0.608300 2.324200)
                (0.105900 0.138000 0.204000 0.337400 0.613800 2.324800)
                (0.131500 0.162500 0.224000 0.355300 0.628700 2.330300)
            )
        )
    )

    Model(SlopeFallModel0 fall_x2Mod
        (Spline
            data(
                (0.055200 0.072800 0.104500 0.167100 0.290500 1.062800)
                (0.058500 0.075500 0.107700 0.167100 0.292500 1.063300)
                (0.064900 0.082100 0.109900 0.172100 0.295200 1.063900)
                (0.075200 0.091400 0.121100 0.180600 0.298700 1.064400)
                (0.094300 0.111400 0.139100 0.196600 0.312300 1.067600)
                (0.124800 0.140200 0.171100 0.223400 0.335800 1.077800)
            )
        )
    )

    Timing_Props(
        Area(5.000000)
    )

    Pin(O Pintype(Data) Pindir(Output) Function(I) Timing_Props(Load_Limit(0.607000)))
    Pin(I Pintype(Data) Pindir(Input) Timing_Props(Pin_Cap(0.005800)))

    Path(I => O  01 01 Delay(ioDelayRiseModel0) Slew(SlopeRiseModel0))
    Path(I => O  10 10 Delay(ioDelayFallModel0) Slew(SlopeFallModel0))

)

Cell(BUF3CK
    Celltype(Comb)

    Model(ioDelayRiseModel0 rise_x3Mod
        (Spline
            data(
                (0.118200 0.128400 0.147300 0.182900 0.253000 0.669300)
                (0.131500 0.141800 0.160800 0.196400 0.265900 0.682100)
                (0.160100 0.170400 0.189400 0.224700 0.294000 0.709600)
                (0.202000 0.212600 0.231900 0.267700 0.336100 0.750600)
                (0.258500 0.269700 0.289800 0.326300 0.395200 0.807600)
                (0.331500 0.344000 0.365500 0.403800 0.474200 0.888200)
            )
        )
    )

    Model(ioDelayFallModel0 fall_x3Mod
        (Spline
            data(
                (0.108000 0.118600 0.137300 0.170000 0.227700 0.552400)
                (0.118600 0.129300 0.148100 0.180600 0.238500 0.563200)
                (0.136600 0.147500 0.166700 0.199900 0.257900 0.582300)
                (0.160400 0.171800 0.191500 0.225500 0.284200 0.608700)
                (0.190300 0.203200 0.224500 0.260000 0.320600 0.645400)
                (0.221600 0.235700 0.259600 0.299100 0.364100 0.693600)
            )
        )
    )

    Model(SlopeRiseModel0 rise_x3Mod
        (Spline
            data(
                (0.075700 0.096900 0.136400 0.224200 0.405300 1.507200)
                (0.076500 0.098400 0.139600 0.226500 0.405900 1.507300)
                (0.080600 0.102800 0.142000 0.228200 0.407400 1.507400)
                (0.091600 0.110900 0.150600 0.234500 0.410000 1.507700)
                (0.104900 0.122500 0.164900 0.245500 0.418800 1.509100)
                (0.131500 0.147700 0.186300 0.266400 0.437800 1.516600)
            )
        )
    )

    Model(SlopeFallModel0 fall_x3Mod
        (Spline
            data(
                (0.055200 0.067500 0.091500 0.130200 0.216700 0.730200)
                (0.058900 0.070200 0.091500 0.134300 0.218200 0.731100)
                (0.065100 0.076800 0.098500 0.136800 0.221000 0.732300)
                (0.074600 0.086700 0.109000 0.147300 0.228200 0.734000)
                (0.097600 0.108700 0.128200 0.167300 0.242300 0.738700)
                (0.127500 0.139100 0.161000 0.196400 0.271800 0.754600)
            )
        )
    )

    Timing_Props(
        Area(7.000000)
    )

    Pin(O Pintype(Data) Pindir(Output) Function(I) Timing_Props(Load_Limit(0.949200)))
    Pin(I Pintype(Data) Pindir(Input) Timing_Props(Pin_Cap(0.007200)))

    Path(I => O  01 01 Delay(ioDelayRiseModel0) Slew(SlopeRiseModel0))
    Path(I => O  10 10 Delay(ioDelayFallModel0) Slew(SlopeFallModel0))

)

Cell(BUF4CK
    Celltype(Comb)

    Model(ioDelayRiseModel0 rise_x4Mod
        (Spline
            data(
                (0.105500 0.120100 0.147400 0.201100 0.307400 0.519600)
                (0.118000 0.132600 0.159900 0.213400 0.319400 0.531700)
                (0.143400 0.158100 0.185300 0.238200 0.344100 0.555900)
                (0.180400 0.195500 0.222900 0.275500 0.380600 0.592100)
                (0.229700 0.245500 0.274000 0.327200 0.432000 0.642600)
                (0.292700 0.310000 0.340100 0.395000 0.501300 0.713400)
            )
        )
    )

    Model(ioDelayFallModel0 fall_x4Mod
        (Spline
            data(
                (0.097500 0.111800 0.136500 0.180600 0.262500 0.423800)
                (0.107700 0.122200 0.147100 0.191000 0.273000 0.434300)
                (0.124400 0.139000 0.164600 0.209000 0.291000 0.452100)
                (0.146600 0.161800 0.188200 0.233200 0.315600 0.476600)
                (0.174300 0.191300 0.219500 0.267000 0.350100 0.511000)
                (0.202800 0.222300 0.253800 0.305400 0.393100 0.557000)
            )
        )
    )

    Model(SlopeRiseModel0 rise_x4Mod
        (Spline
            data(
                (0.078600 0.106000 0.175700 0.312000 0.591600 1.153700)
                (0.079100 0.108900 0.176200 0.312000 0.592000 1.153700)
                (0.084500 0.113100 0.178900 0.314700 0.592000 1.154000)
                (0.088700 0.119000 0.185200 0.317700 0.594400 1.155000)
                (0.106600 0.134200 0.196000 0.326300 0.600500 1.157100)
                (0.131400 0.155600 0.216900 0.345700 0.615500 1.166800)
            )
        )
    )

    Model(SlopeFallModel0 fall_x4Mod
        (Spline
            data(
                (0.053100 0.070400 0.102500 0.164300 0.291200 0.548400)
                (0.055900 0.072100 0.105400 0.164300 0.292600 0.548400)
                (0.060800 0.079400 0.107400 0.171500 0.294300 0.549400)
                (0.072900 0.088700 0.118600 0.178700 0.298300 0.553700)
                (0.094000 0.108500 0.136400 0.194400 0.312100 0.559900)
                (0.121900 0.136600 0.167100 0.220800 0.334600 0.578200)
            )
        )
    )

    Timing_Props(
        Area(7.000000)
    )

    Pin(O Pintype(Data) Pindir(Output) Function(I) Timing_Props(Load_Limit(1.258200)))
    Pin(I Pintype(Data) Pindir(Input) Timing_Props(Pin_Cap(0.011300)))

    Path(I => O  01 01 Delay(ioDelayRiseModel0) Slew(SlopeRiseModel0))
    Path(I => O  10 10 Delay(ioDelayFallModel0) Slew(SlopeFallModel0))

)